Free shower glass design software
An online shower configurator for glass shops, installers and contractors. Pick a layout, enter your sizes, place the hardware and download shop drawings, all free and in your browser.
No install. No credit card. Email needed only to download PDFs.
What the shower configurator does
Start from a layout
Single door, door with inline panel (either hand), 90° corner or walk-in panel. Each opens with typical sizes and hardware already placed.
Real-world sizes
Type sizes to the nearest 1/16" (34-1/2, 34 1/2 or 34.5). Enter each side as measured, with out-of-plumb walls and out-of-level floors, and the glass is drawn to fit.
Hardware placed for you
Wall-mount hinges and the pull handle land in standard positions and move with the glass. Drag a part, or type its exact offset.
Cut-outs and holes
Add holes and hardware cut-outs to any edge. Every cut-out is dimensioned from the glass edge on the drawing.
Built-in checks
The designer flags parts too close to an edge or each other, and shows each panel's area and weight as you work.
Shop-ready PDFs
Download a Glass Order with one dimensioned shop drawing per panel, plus a Hardware List with channel and metal cut sizes.
Shower layouts you can design
Frameless Shower Door
A single hinged door between two walls: the most common frameless shower. Start from a 34" × 76" door, type your real sizes, and the hinges and handle re-place themselves.
Open in the designer →Shower Door with Inline Panel
A door hinged on the wall with a fixed panel beside it, held in U-channel. Change either width and the drawings and channel cuts update together.
Open in the designer →Inline Panel and Door (Mirrored)
The same layout as a door with inline panel, mirrored for openings where the door swings from the right-hand wall.
Open in the designer →90° Corner Shower Glass
A corner enclosure with the door on the front and a fixed return panel on the side. Each panel gets its own drawing with sizes on every edge.
Open in the designer →Walk-In Shower Glass Panel
One fixed panel with no door, for walk-in showers. Set the width and height, and mark a sloped top or leaning wall if the opening isn't square.
Open in the designer →
Built for the people who cut and hang the glass
Most shower configurators are sold to fabricators as part of a full shop system, with a sales call and a monthly fee. This one does one job: get a frameless shower from tape measure to a clear drawing fast, for free.
- Measure, design and send the glass order the same day.
- Hand the fabricator one drawing per panel, with every cut-out dimensioned.
- Check the hardware list and channel cuts before you order metal.
From opening to order in three steps
- 1. Pick a layout. Choose a template, or start from a blank panel.
- 2. Enter your sizes. Type the real measurements. Hinges and handle re-place themselves.
- 3. Download the drawings. Get the Glass Order and Hardware List as PDFs.
Need a panel's weight first? Try the free glass weight calculator.
Questions
- Is there free shower glass design software?
- Yes. Glass Cutting Software is free to use in your browser. You can design as many showers as you like and enter your email once to download the PDFs.
- What is a shower configurator?
- A shower configurator is a tool that lets you pick a shower layout, enter the opening sizes and choose hardware, then works out the glass sizes and drawings for you. This one is built for the people who measure, order and install the glass.
- Do I need to install anything?
- No. It runs in any modern browser on a desktop, laptop or tablet. There is nothing to download or install.
- What do I get at the end?
- Two PDFs: a Glass Order with a dimensioned shop drawing for every panel and its cut-outs, and a Hardware List with hinges, handles and channel cut sizes.
- Can I rely on the drawings for cutting glass?
- They're a design aid. Always confirm every size on site and check cut-outs against the template that comes with your hardware before glass is ordered or cut.